Overview: Arduino Hexapod Robot has a more natural looking, more articulate leg and body design. The three DOF (degree of freedom) leg design means this robot can walk in any direction! The robot has been designed to use 18 TowerPro SR318 Servos (Max torque 15kg) servos for the legs. The kit includes everything you need to build the robot. In addition you will need Electronics and Batteries. This is quite possibly the nicest looking, best performing, commercially available hexapod out there. Specifications: - 3mm aluminum alloy material, high intensity- Robot shell with installtion hole for switch and controller, very convenient- 18DOF, each leg 3DOF joint- Leg length: 23cm(stretched)- Body shell size: 17.5*15.5cm(L*W)- Color: Black- Could realize go forward, backward, turning, dancing, clambing movements, etc.- Arduino Hexapod Robot has a more natural looking, more articulate leg and body design. The three DOF (degree of freedom) leg design means this robot can walk in any direction!- The robot has been designed to use SR318 Servos (Max torque 15kg) for the legs.- In addition you will need Batteries.- This is quite possibly the nicest looking, best performing, commercially available hexapod out there.- Material: alumnium alooy .blasting processed. 32 CH Channel Servo Motor Control Driver Board:(Your Choice) Newly upgraded controller board.Up to 32 servo motors can be controlled at the same time, either by using a software on a PC, or UART communication ( TTL serial port) of MCU (51, AVR, ARM, FPGA, PIC, etc.) to send commands to control the steering. We can also download instructions to the servo motor controller for offline operation.Features:1.Powerful MCU2.High controlling accuracy3.Offline operation function4.Identify baud rate automatically5.Support for PS2 handle Specifications:*1.Flash memory: onboard 512K ROM (If every command is used to control the 32 motors at the same time, more than 500 commands can be saved.)*2.Controlling MCU power supply: 6.5~12 V or 3.5~5.5V. (USB can be used to power the chip on servos board. And it can be chosen automatically. With the USB reverse protection, it can protect your computer from been hurted by the reverse USB.)*3.Servos power supply: DC (depends on the motors, generally 5V DC)*4.Control channels: 32. (can be controlled at the same time and the accuracy can be adjusted)*5.Communication Input: USB or UART (TTL or USART). (The Bluetooth or some other wireless module can be used to make the controlling)*6.Signal Output: PWM (Accuracy 1us).*7.Servo motor resolution: 1us, 0.09 degrees.*8.Baud Rate: 9600,19200,28400,57600,115200,128000(recognized automatically)*9.Servo motors supported: Futaba, Hitec or some other Servos Motor controlled by PWM.*10.Dimensions: 63.5mm x 43.5mm x 1.5mm.*11.Control mode: USB and UART (TTL) to accept command. (Comes with USB data wire and PC controlling software) SR317 Servo: (Your Choice) No. Item (SR317) Specification 1-1 Storage Temperature Range -20?~60? 1-2 Operating Temperature Range -10?~50? 1-3 Operating Voltage Range 5V~7.2V 5-8 Reduction Ratio 240:1 6-1 Control System Change the pulse width 6-2 Operating Frequency 50Hz 6-3 Operating Angle 90° (1000â†?000 μsec) 6-4 Neutral position 1500 μsec 6-5 Dead band width 4 μsec 6-6 Rotating direction Counterclockwise(1500â†?000 μsec) 6-7 Pulse width range 800â†?200 μsec 6-8 Maximum travel About 165°(800â†?200 μsec) 5-2 Limit angle 180°± 10° 5-3 Weight 56± 1 g 5-8 Reduction ratio 240:1 SR318 Servo:(Your Choice) Speed:(sec/60°): 13Kg.cm/0.16sec/60°@5.0V 15Kg.cm/0.15sec/60°@6.0V 16Kg.cm/0.14sec/60°@7.4V No. Item (SR318) Specification 1-1 Storage Temperature Range -20?~60? 1-2 Operating Temperature Range -10?~50? 1-3 Operating Voltage Range 5V~7.4V 5-8 Reduction Ratio 310:1 6-1 Control System Change the pulse width 6-2 Operating Frequency 50-330Hz 6-3 Operating Angle 180° (500â†?500 μsec) 6-4 Neutral position 1500 μsec 6-5 Dead band width 3 μsec 6-6 Rotating direction Counterclockwise(1500â†?000 μsec) 6-7 Pulse width range 500â†?500 μsec 6-8 Mechanical Angle 360° 5-2 Limit angle 360° 5-3 Weight 60± 1 g 5-8 Reduction ratio 310:1 Voltage (V): 5-7.4VDimensions(mm): 40x20x40.5mmParameters: Digital servo, 1723 core motors, copper gear Frame Kit Only Package List: 12x Servo bracket 6x Upper leg 6x Lower leg 2x Mounting plate6x Cup bearing 18x Metallic servo wheel 1x Set of screws and nutsSR317 Servo Motor Kit Package List:1x PS2 Wireless Controller Receiver1x USB Cable1x 32 CH Channel Servo Motor Control Driver Board12x Servo bracket 6x Upper leg 6x Lower leg 2x Mounting plate6x Cup bearing 18x SR317 servo 18x Metallic servo wheel 1x Set of screws and nuts SR318 Servo Motor Kit Package List:1x PS2 Wireless Controller Receiver1x USB Cable1x 32 CH Channel Servo Motor Control Driver Board12x Servo bracket 6x Upper leg 6x Lower leg 2x Mounting plate6x Cup bearing 18x SR318 servo 18x Metallic servo wheel 1x Set of screws and nuts
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.