This Diamond Shine ultra high speed finish by Pioneer Eclipse is a metal cross-linked, all-purpose finish that leaves a tough, long lasting base with a "diamond" wet-look shine when used with one of our high speed burnishers on vct, terrazzo, concrete, marble, and quarry tile floors. The finish comes in a case of four 1 gallon bottles and will cover up to 3,000 sq. ft. per gallon. These finishes can be applied with a clean synthetic mop or with one of our wax applicators. Works great with our Luster Lite Pads. View our full line of floor wax & finishes to see what other finishes we have available for your floors.Directions1. For a floor that has been stripped, properly neutralized, rinsed and allowed to dry thoroughly, apply 5-6 thin coats using a clean synthetic mop. Allow the floor to dry thoroughly between coats and prior to burnishing.2. Optional: Apply 2 thin coats of floor sealer for old or porous floors or for high traffic areas, then apply 4 coats of finish.3. For a floor that has been deep scrubbed and allowed to dry thoroughly, apply 1-2 thin coats using a clean synthetic mop. Allow floor to dry thoroughly between coats and prior to burnishing.
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.