DESCRIPTION Ultra-thin body design, easy portability RS232 port (optional) USB port : power supplying via USB bus, communicating with PC LAN port (optional) : remote control Channel 1 signal input Channel 2 signal input EXT trigger input, trigger output, or Pass/Fail output probe compensation : measurement signal (3.3V/1KHz) output Note : When communicating with PC via LAN, the oscilloscope should be powered by adapter. Record length up to 10M Various record length option, max 10M. Multi-trigger option Edge, Video, Slope, Pulse, and Alternate X-Y mode, FFT mode with waveform displayed on the same screen SPECIFICATION Bandwidth: 25MHz Channel: 2+1 (multi) Sample Rate: 100MS/s Horizontal Scale (s/div): 5ns/div~100s/div, step by 1~2~5 Rise Time: <=14ns Record Length: 5K Input Coupling: DC AC GND Input Impedance: 1MΩ+-2%,in parallel with10Pf+-5pF Channels Isolation: 50Hz : 100 : 1, 10MHz : 40 : 1 Max Input Voltage: 400V (PK - PK) (DC+AC, PK - PK) DC Gain Accuracy: +-3% DC Accuracy: Average>=16: +-(3% reading + 0.05div) for ?T Probe Attenuation Factor: 1X, 10X, 100X, 1000X LF Respond (AC, -3dB): >=5Hz (at input, AC coupling, -3dB) Sampling Rate / Relay Time Accuracy: 150ps Interpolation: sin(x) / x Interval (?T) Accuracy (full bandwidth): Single: +-(1 interval time + 100ppm × reading + 0.6ns), Average >16: +-(1 interval time + 100ppm × reading + 0.4ns) Vertical Resolution (A/D): 8 bits resolution (2 channels simultaneously) Vertical Sensitivity: 5mV/div~5V/div Communication Interface: USB 1.1 WHAT'S IN THE PACKAGE 1x VDS1022I Oscilloscope 2x Probe 1x USB Cable 1x Power Cord 1x CD( Mannual,etc.)
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.