DESCRIPTION Bandwidth : 100 MHz Channels: 1 Sample Rate: 1 GS/s 2 in 1 (DSO + Multimeter) Auto-scale function 20 automatic measurements USB data transmission supported Waveform record and replay Multimeter newly supported SCPI Rechargeable Li-ion battery (6 hours' backup) Specifications Bandwidth 100 MHz Sample rate(Real time) 1 GS/s Horizontal Scale(S/div) 5 ns/div ~ 100 s/div, step by 1~2~5 Rise time (at input, typical) 3.5 ns Channels Single Display 3.7 inch color display with TFT panel (640×480 pixels) Input impedance 1 MΩ ± 2% in parallel with 15 pF ± 5 pF Probe attenuation factor 1X,10X,100X,1000X Max. input voltage 400 V (PK - PK) (DC + AC, PK - PK, 1MΩ input impedance, probe attenuation 10 : 1), CAT II Record length Max. 6000 points on each channel Interpolation (sin x)/x Input coupling DC, AC, GND Acquisition modes Sample, Peak Detect and Average Vertical resolution (A/D) 8 bit Vertical sensitivity 5 mV/div ~ 5 V/div(at input) DC gain accuracy ±3% DC accuracy (Average) Average > 16: ± (3% reading + 0.05 div) for ΔV Trigger type Edge, Video, Alternate Trigger mode Auto, Normal, Single Trigger level ±6 divisions from screen center Waveform math +, -, ×, ÷, FFT Waveform storage 4 waveforms Communication interface USB Cymometer Available Power supply 100 V - 240 V AC, 50/60 Hz Multimeter Specification Full scale reading 3 3/4 digits (Max.4000-count) Input Impedance 10 MΩ Capacitance 51.2 nF - 100 uF: ± (3% ± 3 digit) Voltage VDC: 400 mV, 4 V, 40 V, 400 V, 1000 V: ± (1% ± 1 digit); max input : DC 1000 V VAC : 4 V, 40 V, 400 V: ± (1% ± 3 digits), 750 V: ± (2% ± 3 digits); Frequency : 40 Hz - 400 Hz; max input : AC 750 V (virtual value) Current DC: 40 mA, 400 mA: ± (1.5% ± 1 digit), 20 A: ± (3% ± 3 digits) AC: 40 mA: ± (1.5% ± 3 digits), 400 mA: ± (2% ± 1 digit), 20 A: ± (5% ± 3 digits) Impedance 400 Ω: ± (1% ± 3 digits), 40 ΚΩ - 4 ΜΩ: ± (1% ± 1 digit), 40 MΩ: ± (1.5% ± 3 digits) Included Accessories: 1 x Battery 1 x AC/DC Adapter 1 x Oscilloscope probe 2 x Multimeter test leads 1 x USB Mass storage connect cable 1 x Extension module 1 x Probe Adjustment tools 1 x USB/RS-232C communication cable 1 x User Manual 1 x Software CD-ROM 1 x Output terminal
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.