EcoFlow PowerOcean 5kW Plus Single-Phase Hybrid Inverter with Smart Meter 5kW single-phase hybrid inverter for new or existing solar PV and battery-storage installations. Supports up to 11kW of solar PV input across two MPPT trackers. Supplied with a 120A smart meter for monitoring site import, export and energy flows. A flexible 5kW solar and battery inverter The EcoFlow PowerOcean 5kW Single-Phase Hybrid Inverter is designed for homes adding solar battery storage to a single-phase supply. It manages energy from solar PV, compatible PowerOcean LFP batteries, household loads and the grid, helping to increase use of on-site solar generation. With two MPPT trackers and up to 11kW of maximum PV input, the inverter can suit solar arrays across two roof aspects or two separately configured strings. The supplied smart meter provides the system with the grid measurement required for energy monitoring and control. Key features 5,000W rated AC output and 5,000VA maximum apparent power. Up to 11,000W maximum solar PV input with two MPPT trackers. 18A maximum input current per MPPT with a single PV input, or 16A per MPPT with dual PV inputs. Compatible with EcoFlow PowerOcean LFP battery systems up to 15.3kWh. IP65 enclosure for indoor or outdoor installation in a suitable location. Where to use the EcoFlow PowerOcean 5kW inverter The EcoFlow PowerOcean 5kW hybrid inverter is suitable for compatible single-phase homes with solar PV, battery storage or both. It can be specified for self-consumption systems, solar-and-battery retrofits and installations that require supported backup-load operation. It can be a practical choice for properties with solar generation split across two roof orientations, such as east/west or south/east arrays. Backup operation requires an appropriate system design, including compatible battery storage and correctly specified backup circuits. This inverter must be installed and commissioned by a competent installer. Grid connection arrangements, G98/G99 requirements, solar string design, battery compatibility, metering and protective devices must be confirmed for the individual installation. UK expert support is available, and Energian can help arrange installation through trusted partners. Technical specifications Model EF HD-P1-5K-S1 Inverter type Single-phase hybrid inverter Maximum PV power 11,000W Maximum PV input voltage 600V MPPT voltage range 90–520V Maximum input current per MPPT 18A, single PV input; 16A, dual PV input Maximum short-circuit current per MPPT 20A Backfeed current to PV array 0A Number of MPPT trackers 2 PV overvoltage category II Battery rated voltage 790V Battery maximum voltage 800V Battery rated current 7.6A Battery maximum current 7.6A Maximum battery capacity 15.3kWh Grid connection L + N + PE Rated AC input power 5,000W Maximum AC input apparent power 5,000VA Rated AC input voltage 220 / 230 / 240V, L + N + PE Maximum AC input current 26.7A Nominal frequency 50 / 60Hz AC input overvoltage category III Rated on-grid output power 5,000W Maximum on-grid apparent power 5,000VA Rated on-grid output voltage 220 / 230 / 240V, L + N + PE Rated on-grid output current 21.7A Maximum on-grid output current 25A On-grid total harmonic distortion at rated power ≤3% Power factor -0.8 to 1 to +0.8 Maximum backup output power 5,000VA Backup output voltage 220 / 230 / 240V, L + N + PE Backup nominal frequency 50 / 60Hz Backup rated output current 21.7A Backup maximum output current 26.7A Maximum efficiency >96.5% European weighted efficiency >96% GFCI Supported Insulation resistance detection Supported Anti-islanding protection Supported PV reverse-polarity protection Supported AC overcurrent protection Supported AC short-circuit protection Supported AC overvoltage protection Supported Certificates CE / CB / DEKRA MARK Safety standards IEC/EN 62109-1, IEC/EN 62109-2 Grid-tied standards G98, G99, G100, VDE-AR-N 4105, CEI 0-21, UTE C15-712-1, VDE 0126-1-1, EN 50549-1, C10/11, NTS631, UNE 217001, UNE 217002, PPDS, PTPiREE, PSE, NC RfG, Ordinance No.140, NRS 097-2-1 EMC standards EN/IEC 61000-6-1/2/3/4, IEC 61000-4-16/18/29, IEC 61000-2-2, EN 300328, EN 301489-1, EN 301489-17, EN IEC 62311 Topology Non-isolated Ingress protection rating IP65 Protective class Class I Operating temperature range -20°C to +50°C; derating above +40°C or below 0°C Storage temperature range -30°C to +60°C Operating humidity 0–100%, condensing Maximum operating altitude 3,000m; derating above 2,000m Dimensions (W×D×H) 679.6 × 182.7 × 280mm Weight 21.5kg Noise emission 40dB Night-time self-consumption <30W Cooling method Natural convection Communication methods RS485, CAN, Wi-Fi, Bluetooth, WAN and 4G Wi-Fi frequency range / maximum output power 2,400–2,483.5MHz / 17dBm Bluetooth frequency range / maximum output power 2,400–2,483.5MHz / 8dBm Pollution degree PD3 Environmental category Outdoor / indoor Documents available for download EcoFlow PowerOcean 5kW Hybrid Single-Phase Inverter datasheet EcoFlow PowerOcean 5kW Hybrid Single-Phase Inverter user manual EcoFlow PowerOcean 5kW Hybrid Single-Phase Inverter installation guide Shipping and UK expert support Shipping is available to the UK, Ireland, Africa, the Caribbean and worldwide. If a shipping rate is not shown at checkout, contact us on +44 2080 640335 or [email protected] for a quote. UK expert support is available for product questions, inverter selection and system-design support. Contact Energian by phone, email or live chat, or visit our office for an in-person consultation.
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.
