Restore Pump Protection With a Fresh AquaJet 1300 Housing Cover The Aquascape AquaJet 1300 (G2) Pump Housing Cover Kit is a factory replacement outer cover assembly for the second-generation AquaJet 1300 submersible pond and waterfall pump. The housing cover shields the motor section from large debris and protects the pump body from physical damage during installation or routine pond maintenance. Keep the Motor Section Protected During Every Season The AquaJet 1300 G2 operates continuously in pond environments where rocks shift, tools are occasionally dropped near the pump, and organic debris accumulates. A cracked or missing housing cover leaves the motor section vulnerable to debris and direct mechanical impact. Replacing a damaged cover promptly prevents a minor cosmetic issue from escalating into motor damage or seal compromise. Specification Value Compatible Pump Aquascape AquaJet 1300 (G2) Component Outer pump housing cover Fit Type OEM direct replacement Material UV-stable thermoplastic How to Use Power down and remove the pump. Release the clips or retaining screws securing the existing cover. Remove the old cover and inspect the O-ring or gasket in the mating surface; replace if compressed or cracked. Fit the new housing cover, aligning all retention tabs, and press until all clips engage. Test the pump in a bucket of water to confirm normal operation before returning to the pond. Ideal for AquaJet 1300 G2 pumps used in small-to-medium pond and waterfall systems where the housing cover has cracked during seasonal maintenance or rock placement.
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.
