Fits Where Campervan Space Is Limited: At 354 × 176 × just 187mm high, the WattCycle 12V 100Ah lithium leisure battery uses a DIN H8/L5 footprint developed for space-conscious campervan and motorhome installations. Its low-profile case makes it particularly relevant to compatible underseat battery compartments where standard taller leisure batteries may be difficult to install. At only 11.35kg, it also keeps battery weight relatively low when upgrading a campervan electrical system. 1.28kWh of LiFePO4 Energy from a 100Ah Battery: The battery combines a nominal voltage of 12.8V with 100Ah capacity, providing 1,280Wh, or 1.28kWh, of stored energy. This makes it suitable for the 12V electrical systems commonly found in campervans and motorhomes, including lighting, water pumps, compressor fridges, USB charging and other leisure loads. Actual runtime depends on the appliances connected, their duty cycles, inverter efficiency, charging input and available battery capacity. Self-Heating for Cold-Weather Charging: LiFePO4 batteries require special protection when charging at low cell temperatures. When the cells in this battery are below 0°C, connecting a charging source activates the integrated heating system. The battery warms the cells first, and normal charging resumes when cell temperature rises above 5°C. This makes the battery particularly useful for campervans that may remain cold overnight before receiving energy from an alternator, mains charger or solar system. 100A BMS for Up to 1280W of Continuous DC Output: The integrated 100A Battery Management System supports up to 100A continuous charge and discharge current, corresponding to a maximum continuous DC output of 1,280W at 12.8V. For inverter systems, a roughly 1000W-class inverter provides a more practical design target once conversion losses and operating margin are considered. The BMS also monitors battery operating conditions and includes voltage, current and temperature-related protection thresholds. Monitor Battery Status from the WattCycle App: Built-in Bluetooth allows the battery to communicate with the WattCycle App, giving you a convenient way to check battery information from your smartphone without relying solely on a separate display. The App data includes battery status, temperature, voltage, current and individual cell voltages. Charging and discharging functions can also be managed through the App. Account binding/password functionality adds an additional layer of control over who can manage the connected battery. A Practical LiFePO4 Upgrade from Traditional Leisure Batteries: For campervan owners moving away from lead-acid or AGM, LiFePO4 technology can offer greater usable energy from a given nominal capacity, lower battery weight and considerably higher cycle capability. This WattCycle model is rated for 6,000 cycles at 80% depth of discharge. Expandable When 100Ah Is No Longer Enough: One battery provides 100Ah and 1.28kWh. If your electrical requirements increase, the battery supports up to four batteries in parallel and four in series. Four parallel batteries provide a calculated 400Ah and 5.12kWh at 12.8V nominal, while the stated maximum 4P4S configuration reaches 20.48kWh. Built Around Familiar Campervan Installation Requirements: The product uses an ABS enclosure, M8 terminals, an IP65 protection rating and a grooved housing base. The battery is suitable for Fiat Ducato, Citroën Jumper, Peugeot Boxer and Ford installations.
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.
